Questions? Call us: +1 760-918-6722

INT043BTFT touch controller

Greetings. Am I right in saying that the INT043BTFT-TS has a "built-in" MAX11802 touch controller or has this to be added separately?

I will be using a ST Microelectronics Nucleo-64 with a 32-bit STM32L476RG microcontrollelr on the PCB. This should be OK to drive this TFT in MCU mode?

Replies

engineering_seacomp's picture
engineering_seacomp
September 28, 2020

Hi,

Yes, it has a build tin MAX11802 touch.  There is a display buffer in the built in SSD1961, so this should be good for you.

For any design, you will need a graphics library from STM or other third party source.