Questions? Call us: +1 760-918-6722
64128MX-RGB Graphic LCD Module
128x64 Graphic LCD Display with RGB Backlight
Display Resolution | 128 x 64 |
Viewing Angle | 6 o'clock or 12 o'clock |
Display Connector | FPC |
LCD Driver IC | Sitronix ST7565R |
Module Size (w x h x d) | 77.4 x 52.4 x 10.5 mm |
View Area (w x h) | 70 x 40 mm |
Pixel Size | 0.48 x 0.48 mm |
Driving Method | 1/65 Duty, 1/9 Bias |
Operating Temperature | Wide (-20 ~ 70°C) |
Backlight Supply Voltage | 3.2V |
Backlight Current | 80 mA |

Our 64128MX monochrome graphic LCD module has a viewing area of 70 x 40 mm. This LCD is widely used in industries such as home automation and test and measurement equipment. The COG IC is the Sitronix ST7565R. This LCD has a FPC interface.
The ST7565R is a single-chip dot matrix LCD driver that can be connected directly to a microprocessor bus. 8-bit parallel or 4-line SPI display data sent from the microprocessor is stored in the internal display data RAM and the chip generates a LCD drive signal independent of the microprocessor. Because the chips in the ST7565R contain 65x132 bits of display data RAM and there is a 1-to-1 correspondence between the LCD panel pixels and the internal RAM bits, these chips enable displays with a high degree of freedom. The ST7565R chips contain 65 common output circuits and 132 segment output circuits, so that a single chip can drive a 65x132 dot display (capable of displaying 8 columns x 4 rows of a 16x16 dot kanji font).